Jm202a & Pic18f252

Hi:
Please, i need some big help.
I need C code to use with a pic18f252: just a complete program to make a jm202A
(2x16 characters) LCD Display works.
Just want to write in line 1 -> "Coins Value" and in line 2 -> "€ __.__"
In line 2 i want to display the result of a counter (counts coins until € 99.99)
Thanks.
Regards.

Hi.
Well, datasheet explains how to "draw" a specified character in the lcd, but still no answer from the lcd with my program.
Really nedd help with programming..

HERMES_PT said:

Hi.
Well, datasheet explains how to "draw" a specified character in the lcd, but still no answer from the lcd with my program.
Really nedd help with programming..

Click to expand...

You can check my tutorials for assembler code, and the list of commands for the LCD - but I can't help you with C. LCD text modules are quite difficult to get working - for a start, do you have the contrast control conected properly?, you should be able to turn the contrast up and get a single line of black squares - this works with a completely uninitialised module.

If you can't get the black squares you have a hardware problem!.