Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Integrated Circuit Design

Status
Not open for further replies.

Ese Osaghae

New Member
Hello! I was wondering if I could get some help on building a schematic with the following constraints:

An input for the circuit needs to be a tact-button with a debounce capacitor going into a KPP OR GPIO pin assigned as an external interrupt port. The driving port should be out of GPIO connected to the circuit with photo-MOS.

Thank you for any help in advance!
 
Hello! I was wondering if I could get some help on building a schematic with the following constraints:

An input for the circuit needs to be a tact-button with a debounce capacitor going into a KPP OR GPIO pin assigned as an external interrupt port.

So far, this makes sense...

The driving port should be out of GPIO connected to the circuit with photo-MOS...
This makes no sense. Please add a block diagram of what you are trying to do...
 
I am doing some research into circuit design for my company. I am attempting to create a circuit that will discharge slowly over time. The pieces in the circuit would include a GPIO that uses a photo-MOS for signal pickup from an external computer system.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top