https://i48.tinypic.com/1o4ow9.jpg
why in this circuit they say that in t<0
the voltage on both capacitators is 12 volts??
if both points of each capacitators is connected to the voltage source directy
then 12 volts is ok.
but here we have a resistor between them
this resistor drops the original voltage
it cannot be 12
why in this circuit they say that in t<0
the voltage on both capacitators is 12 volts??
if both points of each capacitators is connected to the voltage source directy
then 12 volts is ok.
but here we have a resistor between them
this resistor drops the original voltage
it cannot be 12