i have Problem on Orcad. need help~~~~

[wontall]

If i place IC parts from library , when simulate , Orcad always tell me
that " Less than 2 connections at node N03183"(N03183 is the IC).
but actullay i have connected IC already.~~~~~

Addition, a DRC warning :"WARNING: [NET0093]
No PSpiceTemplate for U1, ignoring". how i can solve it?
thanks, wait for ur reply.

 

[TillEulenspiegel]

Sounds like the pins of the IC are not assigned. You can take a part w/ no characteristics and connect wires, but if the pins are not assigned a value or state in the specifications it wont work with the circuit sim.