picstudent
New Member
Hello
My input signal is 3.3V to 5 volts.
I need to amplify and offset this to 0 to 5 volts.
3.3V to 5V should be converted to 0 to 5V for ADC.
Is it possible to implement using Opamp(s) with +12V supply. No negative rail.
Thanks
My input signal is 3.3V to 5 volts.
I need to amplify and offset this to 0 to 5 volts.
3.3V to 5V should be converted to 0 to 5V for ADC.
Is it possible to implement using Opamp(s) with +12V supply. No negative rail.
Thanks
Last edited: