CalebG
New Member
hello I have been trying to find a fix for my 17" nec multisync lcd monitor. At startup the v-hold fails to hold, after a few minutes of warm up the v-hold corrects itself, but there are still many horizontal bars flickering across the screen, also I have a single pixel wide line down the left side about 2" in from the side. and last but not least the lower left backlight appears to be flickering. I am assuming I have a problem in the high voltage power supply, I replaced the electrolytic caps that I had spares for, there are still 3 that I didnt have replacements for. I have a capacitor meter on order that should be here in a few days. When I got the monitor it was stone dead, the power supply board appeared that something had been spilled in it, after cleaning off the goo on the board it sort of functions, I would love to get this fixed. What next? If anyone could pinpoint a likely source that would cause all the problems that would be awesome. I included a couple pics so you can see whats going on.
Thanks in advance Caleb
Thanks in advance Caleb