Header strip connectors

jack0987

Member
In a computer case when connecting the case leds and switches to the motherboard, there are small conectors on the wires that plug into the motherboard header.

Where can I get them without paying an arm and a leg for them?

Later edit: I should have also asked what they are called so I can google them.

Thanks.
 
Last edited:

hi,
Molex connectors, headers..
Terminals | Farnell United Kingdom
 
eric, I've had zip for luck finding the type of connectors I think he's talking about.
Molex is a brand name, and there like a zillion different types and I can't seem to find any two way connectors which is I'm assuming one of the types he's looking for as they're very common for things like LED and power/reset switch connectors.

I think this link is picture of the specific type of connector they're looking for.
https://www.mysuperpc.com/build_your_own_computer/q_connector_hdd_power_reset.jpg

The header pins themselves are easy to find.
 
Last edited:
Thanks.
Yes, the ones for the power and reset switch, etc.
A lot of parts suppliers do not have pictures.
Is there a specific name for them?

Later edit: If I could get them with the wire leads that would be nice.
 
Last edited:
I think I may have actually found some. you may look at it if you wish.

**broken link removed**

I googgled mini molex.
 
Seems like decent prices too.
 
Last edited:
That's exactly what I've been looking for, too.

By coincidence, I'll be in the 1300 block of Edinger tomorrow morning! **broken link removed**

update: they weren't open today :-(
 
Last edited:
Seems like decent prices too.

hi SC,
These are the same type as I suggested, commonly referred to as Molex connectors, available in 0.1inch for signal wires or 0.2inch pitch for power wires.

 
Last edited:
Eric, I think we're talking about two different things here? He didn't want to find a supplier for the headers. He wanted to find a supplier for the connectors to those headers. I can't find connectors on the link your provided in post #2, the parametric search seems a little flakey can you provide a specific part number at Farnell to what you think is a good solution, and the image you posted in post #9 is for headers not the connectors to them.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…