Good comparator IC for LDR light sensor circuit?

I will be using this circuit for the light sensor portion of several projects. What IC would you recommended for this application.
Power supply will be 7.4v, 9v & 12v for various applications. Thanks.

I'd think any op amp would do. Without any feedback though I'd expect it to repeatedly switch when sat at the threshold.

I think VCC/Ground/Output area bit swapped around

hi hh,
The LM393 requires hysteresis, else the output could oscillate close to the switch over from day/nite.
Also how do you plan to set the lite/dark switch over for different environments/LDR's
The LM393 output is open collector, you need a pull up resistor to +v.
Add some decoupling caps across the power rails.

Wasting power with two 1k's across the supply, 10k's would be better.
I agree with 'ff',tidy up the polarity layout of the circuit
E

TEMT6000 is not a LDR, it is a NPN photo transistor.
Absolute maximum collector-emitter voltage is 6V.
Datasheet:
https://www.google.fi/url?sa=t&sour...ggeMAA&usg=AFQjCNEMFKBz8o3gbYgnW-UMxmvfeKcvaQ