going to use an ir laser for my rf

[moto]

from what i've researched, i am looking to use a ir. anyone recommend where to get a class 1 ir with approx specs , +/- 870nm wavelength and 14nm pulse duration??

 

[mneary]

from what i've researched, i am looking to use a ir. anyone recommend where to get a class 1 ir with approx specs , +/- 870nm wavelength and 14nm pulse duration??

14nm duration? We don't usually quote pulse duration as a distance. I assume you mean a pulse that occurs during the time it would travel 14nm. Using 300 000 m/s, that pulse would be 14 e-12 divided by 3e5. Pulse duration for 14nm would have a duration of 4.67e-17 seconds. In any case, that would be impossible to generate with ordinary electronics.

 

[jpanhalt]

Check your exponents. Is 14 nm 14E-12 meter or 14E-9 meter?

Femtosecond lasers do exist, which puts 14 nm into the realm of current possibility. But, I think the OP probably means nanosecond, as in used in TOF measurements with lasers.

John

Edit: Ericgibbs gives some interesting information in this recent thread: https://www.electro-tech-online.com...ical-signal-with-nanosecond-resolution.98875/

 

[mneary]

Check your exponents. Is 14 nm 14E-12 meter or 14E-9 meter?

oops
But of course 14nm is still much smaller than one wave of 870nm ir.