Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ethenet hub

Status
Not open for further replies.

mikemikemike

New Member
I am sourcing a ethenet hub 1 to 2 only. And because of limited dimension , very small size of hub must be used

The Question is , can i just connect all 3 cat5 cable in parallel. i.e. Cable A pin1 connect to Cable B and Cable C pin1, .....

Could this achieve the problem?

THX
 
mikemikemike said:
The Question is , can i just connect all 3 cat5 cable in parallel. i.e. Cable A pin1 connect to Cable B and Cable C pin1, .....

Could you connect it that way? sure you could...
Would it work? No way!!!
What are devices in the network? If one of them is PC, you could insert one more network card and use two crossover cables (one to each other node).
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top