M moonstreat New Member May 27, 2010 #1 hello guys, I rode these RF circuits: **broken link removed** Uploaded with ImageShack.us AND **broken link removed** Uploaded with ImageShack.us I'd like to know if there is any chance of having 6 outputs RF .. help? Last edited: May 27, 2010
hello guys, I rode these RF circuits: **broken link removed** Uploaded with ImageShack.us AND **broken link removed** Uploaded with ImageShack.us I'd like to know if there is any chance of having 6 outputs RF .. help?
Vizier87 Active Member May 27, 2010 #2 you can multiplex the outputs. I'd use a PIC 'coz of flexibility but there are ready made multiplexing ICs made too. You can have up to 16 different outputs.
you can multiplex the outputs. I'd use a PIC 'coz of flexibility but there are ready made multiplexing ICs made too. You can have up to 16 different outputs.
Vizier87 Active Member May 27, 2010 #4 **broken link removed** but this is just a suggestion, I don't use these things since I prefer PICs.
Mikebits Well-Known Member May 28, 2010 #5 I think you can just change addresses. So D0-3 with address 00000000 control bank A. Change Address to 00000001 to control Bank B on the RX end. See example from data sheet. https://www.electro-tech-online.com/custompdfs/2010/05/ht-12e.pdf I have never used the chip so I am not certain.... **broken link removed** Last edited: May 28, 2010
I think you can just change addresses. So D0-3 with address 00000000 control bank A. Change Address to 00000001 to control Bank B on the RX end. See example from data sheet. https://www.electro-tech-online.com/custompdfs/2010/05/ht-12e.pdf I have never used the chip so I am not certain.... **broken link removed**