I only need 60watts, all I want is an operational circuit. I still am not sure what to do with the voltage regulator in this diagram **broken link removed** the pins are staggered and then obviously it would be very easy to cut the track between them. In reality the pins are in line so do I completely remove the track for the middle pin and create a connection with a bit of copper wire to connect this ground pin to the top track where c3 and c4 are situated.
else what do I do? eg rotate the voltage regulator but I don't want to detract from the diagram because this is my first attempt at a circuit and I'm not sure where to cut the tracks
could I cut a track anywhere as long as all the parts of the circuit are connected?