More Coffee
Member
Anybody with any experience in this field.
My Totally Integrated Power Module is not allowing the wiper wash or the power door looks to operate.
Ive had it apart, and checked the relays inside ,but with no schematic,as to what relay does what,and no possibility of hooking it up while operating..I'm flat out of idea's ,
The board is mostly smd with generic readily available smd IC,..
I really think Ive a couple of transistor's baked that pull down a current to trip the relays..but where..
The boards were manufactured by Motorola..
Any help appreciated.
My Totally Integrated Power Module is not allowing the wiper wash or the power door looks to operate.
Ive had it apart, and checked the relays inside ,but with no schematic,as to what relay does what,and no possibility of hooking it up while operating..I'm flat out of idea's ,
The board is mostly smd with generic readily available smd IC,..
I really think Ive a couple of transistor's baked that pull down a current to trip the relays..but where..
The boards were manufactured by Motorola..
Any help appreciated.