Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

crystal oscillator

Status
Not open for further replies.

almoatazbellah

New Member
hi all,

i have some questions hope someone can answer them, how i can connect a crystal oscillator (like the one in the picture) to an oscilloscope to see its output waveform (i mean what is the circuit diagram require for this task)

**broken link removed**

also how i can connect a crystal oscillator to one input multiplier terminal.
 
The appears to be a crystal, not an oscillator. You need to add some electronics to the crystal for it to become an oscillator.

To connect any signal to a one input multiplier terminal, you connect it between the terminal and circuit common (gnd). The commons of the two circuits must be tied together.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top