converting

Status
Not open for further replies.
U

universal1

New Member
hello all
i can draw any circuit on any electronic program such as eagle-orcad4-orcad10.5-protel

but my problem is
i want to take any picture for the circuit i want to draw by scanner and then take this picture to the electronic program (eagle-orcad.....etc) without drawing it
please if any one have an idea about this i want to know how to make this because the draw becomes more easier
 

You want a program which can translate an image file of a schematic into a loadable Eagle or Orcad file? If so, I think you'll have to write it yourself. If you write it successfully, it could make you rich.

This is not an easy problem to solve. I don't think you're going to find a solution. You just have to do it the old-fashioned way--draw the schematic.


Torben
 
no i think that it is not posible because if you can give me any picture with a dxf or gbr or hpgl format then i could in some working to get my desired circuit
but my problem is how to get the dxf or gbr(write file) file from a bmp file
 
universal1 said:
no i think that it is not posible because if you can give me any picture with a dxf or gbr or hpgl format then i could in some working to get my desired circuit
Click to expand...

Possibly.

but my problem is how to get the dxf or gbr(write file) file from a bmp file
Click to expand...

Aye, there's the rub. Translating raster image data to a schematic format is what we programmers call 'non-trivial'.

That means it's hard. Very hard. You might be able to rig something up using specially programmed image recognition similar to OCR software, but AFAIK no-one had done it yet.

You'll have to write it yourself.


Torben
 
my dear
i tried with using vextractor program and bmp to dxf program and i got a good results but in my question i mean that i need a programm more reliable than this programms for converting pmb or pdf files to (gbr dxf hpgl llb mlb dwg eps format)
 
Status
Not open for further replies.

Similar threads

S
  • Question
converting Old camera display to light screen
Replies
5
Views
1K
ZipZapOuch
A
  • Question
Converting frequency on US devices (60Hz - 50Hz)
2 3 4
Replies
70
Views
9K
SKamaro
S
M
  • Question
Converting a dead LCD 240 x 96 display to video out? Is this possible?
Replies
4
Views
3K
Magistro12
M
K
Converting 4-20 ml to 0-10 volts, would a low power rated resistor provide protection?
Replies
4
Views
2K
schmitt trigger
S
M
Converting 5v output to 3.3v output
Replies
5
Views
1K
Externet
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…