Component Identification

G

Grif22

New Member

• Mar 16, 2021

• #1

Hello,

Can anyone please identify what this is and where to get it from?

Hope someone can help.

Many thanks.

 

rjenkinsgb

Well-Known Member

Most Helpful Member

• Mar 16, 2021

• #2

They appear to be R-C network "snubbers", this type of thing:

RC Network Capacitors | Resistor Capacitor | RS

RC (resistor capacitor) network capacitors are made with metallised paper and are used to store and slowly release charge in electrical circuits.

uk.rs-online.com

The logo on those it TDK / Epcos

 

S

sagor1

Active Member

• Mar 16, 2021

• #3

Seeing markings like CRL and CRH implies some sort of filter to me....
If we knew what device this was from, it could help narrow it down to what they are.

 

S

sagor1

Active Member

• Mar 16, 2021

• #4

Seems to be from an induction stove?? Interference filters probably...

 

D

dougy83

Well-Known Member

Most Helpful Member

• Mar 17, 2021

• #5

If it's an induction stove, then I'm guessing those form the capacitors bank that make up the resonant tank. The markings are a bit strange, but I'd wager 900V 120nF +/-5%. Likewise, the top capacitor in the lower photo would be 1.4kV, 15nF +/-10%.

 

G

Grif22

New Member

• Mar 17, 2021

• #6

Thank you so much for the feedback. It is from an induction hob. I’m planning to solder the burnt out component.

 

G

Grif22

New Member

• Mar 17, 2021

• #7

RC Network Capacitors | Resistor Capacitor | RS

RC (resistor capacitor) network capacitors are made with metallised paper and are used to store and slowly release charge in electrical circuits.

uk.rs-online.com

I can’t seem to find the 900v capacitor on the above website - would there be any other source?

 

rjenkinsgb

Well-Known Member

Most Helpful Member

• Mar 17, 2021

• #8

Epcos do not seem to make any 900V caps in that style, from what I can see.

Can you measure the pin spacing on the larger ones? That may give a clue to the exact type.

 

G

Grif22

New Member

• Mar 17, 2021

• #9

The pin spacing is 22mm. Thanks.