Check IC with analog meter?

I want to check the resistance between pins of a TTL IC with my analog multimeter which has X10K ohm range giving 12Vdc(inside got 12V battery),I do not know whether the 12V batt voltage will damage the TTL IC (which only can stand or supplied by 5Vdc) or not?

What would be the point of measuring the 'resistance' of an IC?.

In any case, the current will only be low, and the voltage probably MUCH less that 5V.

Nigel Goodwin said:

What would be the point of measuring the 'resistance' of an IC?.

In any case, the current will only be low, and the voltage probably MUCH less that 5V.

Click to expand...

Actually I just want to compare the resistance between pins of the measured IC with the good IC, from here I will know it is leakage or open.

wkyong said:

Actually I just want to compare the resistance between pins of the measured IC with the good IC, from here I will know it is leakage or open.

Click to expand...

Probably won't tell you anything useful?, and certainly not unless the chips are from the same manufacturer and of a similar date.

But even then it's really a completely useless test.