Thank you all,
This is my last post here if I get is the sence you are trying to make me justify my studies!
Whether this works or not I am just trying to be safe. These are big numbers.
I am the only one duplicating this project at this time and if you all do not mind just seeing me through this. you all are welcome to watch my failure or success.
If on the other hand you are not interrested in maybe learning what I am learning, about Free energy I will gladly Gladly leave you to your own devices. First let me disclaim this free energy groupie thing. I do not know what it is, or where it comes from, I only want to have your analytical help in being safe. That is it! If I hand you the hot potato I want you to show or tell me where the handle is! That is all I want from any of you. Moreover, you could probably grind up all the people in the free energy croud and you would lprobably not have (ajoule) in the bunch.
I am supose to get 40,000 V of magnetic induction from a 15 turn, air-core coil stationed above my plasma globe. "400 miligauss X 100 V per 1 Miligauss" =40,000 V magnetic induction.
I have not measured the 120 curent powering my magnetic supplier but if you have a plasma globe you can get that number. it is truely insignificant.
Everyone knows that magnetic induction will not hurt or bite.
Now these systems are closed and stand alone. (the globe and the air core coil independantly), An example of this being undiminished is a radio station, it does not matter how many people are tuning in we all get the same input. and the radio station does not need to add power for every person who tunes in.
Fron this place again two wires come from the Air core coil whitch go to the caps.
lets see; if I stack them up in series the values would look like 16.5 KV and 32 uf?
Or if I put them in paralell I would have 5,5 KV and 96 uf I do not know which will be safer. or like I tried to ask before is there another way of doing this?
From this point this magnetic induction is suposed to be safe but I do not want to find out the bad way.
Alright this is where I am.
I am waiting on my LCR meter and The caps. the Isolation transformer is in the mail.
When I get the LCR meter I will be able to measure what I actually have, and make the adjustment in cycles per second, using a resistor and by using the reactance chart in the book electronic tables and formulas.
I will try to ask the question a little differently; lets just forget how I am producing this enormusly large amount of energy and concider if you were to apply a capacitor in this position how would you stack the caps?
I can not imagine how many Heneries I will be measuring ,
I figure I will have somewhere around 32 and 96 uf capacitance, and I do not know what the Resistance value will be. When I get the LCR meter I will post what I am reading.
I am shooting strait from the hip on this one and yes I am so ignorant about this stuff it is scary to say the least.
Uncle $crouge,
I am not able to answer your question none of this stuff makes any sence to me.
I am trying to be as concise as possible and these misteries are why I have come here.
Sceadwian,
I cannot prove anything except I am here writing and communicating with whoever reads, I have nothing it would take to varify any law, reguardless right or wrong.