Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Bond Paper Vending Machine

Status
Not open for further replies.
Your question is too general. What do you need help with?
 
Have a look at this site - it should give you some ideas!
 
Are you going to vend paper by the ream or sheet. Or in packets of 10 sheets ?

If you are going to do single sheets I would leverage the paper handling from a photo copier or heavy printer.

Small packs or reams should not be too hard.

But I expect this is a school project and you just want to know about the electronics ?

3v0
 
Are you going to vend paper by the ream or sheet. Or in packets of 10 sheets ?

If you are going to do single sheets I would leverage the paper handling from a photo copier or heavy printer.

Small packs or reams should not be too hard.

But I expect this is a school project and you just want to know about the electronics ?

3v0

by single sheets only,
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top