I need to make sure that certain employees are at their post during the night shift. I have devised a gadget to make sure of this but because I am electronically challenged, I need some help in designing it.
It works like this;
1>.. Key switch activates gadget
2>.. once activated, a count down timer is set at 15 minutes.
3>.. When the timer reaches zero, a LED (A) flashes and activates a second count down timer set at 5 minutes.
4>.. If a reset button (a) is pressed within the 5 minute countdown, return to 2>.. above. If not, proceed to 5>..
5>.. Relay is activated which energises an alarm siren and a second LED (B) lights up.
6>.. Siren will continue to sound until reset button (a) is pressed, once pressed, return to 2>.. above
7>.. LED (B) can only be reset by de-activating the gadget with the key switch.
Please if anybody can help with the design, i would be much obliged
It works like this;
1>.. Key switch activates gadget
2>.. once activated, a count down timer is set at 15 minutes.
3>.. When the timer reaches zero, a LED (A) flashes and activates a second count down timer set at 5 minutes.
4>.. If a reset button (a) is pressed within the 5 minute countdown, return to 2>.. above. If not, proceed to 5>..
5>.. Relay is activated which energises an alarm siren and a second LED (B) lights up.
6>.. Siren will continue to sound until reset button (a) is pressed, once pressed, return to 2>.. above
7>.. LED (B) can only be reset by de-activating the gadget with the key switch.
Please if anybody can help with the design, i would be much obliged