Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Battery charging time and charging current?

Status
Not open for further replies.
Hello,


See the other thread you started.
 
If you can accept a 19 hour recharge rate things get a lot easier.

Normal rule of thumb for 0.1 C charge rate on NiCads is about 14-16 hours recharge time which is 1.4X to 1.6X the mAH output to 'C' rate mAH's for charging.

Most NiCad's will tolerate up to 0.1C continuous, unterminated charge without too much degradation. If you applied a constant current of about 0.22A (about 0.08C rate) into a 2.8 AH NiCad you should be close to what you need.
 
Thaks, do yo uknow what the capacity of NiCds is after 4 years?

I doubt that there is any real way to to put a real number to that, since the change in capacity over time is dependent on many things, including:
- number of charge/discharge cycles
- depth of discharge,
- ambient temperature
- charge rate
- discharge rate
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top