I have a zigbee transceviver IC...model no. MC13192.I have to connect an antenna to this but the impedance matching is proving to be difficult..maybe because i have never done it before.I hope u guys can help me out.
The antenna has to have a 50ohm input imepdance...i got an example schematic from the transceiver datasheet but i am having a problem with the balun specifed (LDB212G4020C-001) because it's too small for me to work with on a breadboard(all the dimensions are in millimeters).So i need to know if there is could be alternative method..maybe i could do the coupling with discrete components?..or is there any other type of compatible balun available..i did search alot though.
Your help will be appreciated..
The antenna has to have a 50ohm input imepdance...i got an example schematic from the transceiver datasheet but i am having a problem with the balun specifed (LDB212G4020C-001) because it's too small for me to work with on a breadboard(all the dimensions are in millimeters).So i need to know if there is could be alternative method..maybe i could do the coupling with discrete components?..or is there any other type of compatible balun available..i did search alot though.
Your help will be appreciated..
Attachments
Last edited: