Binary sketch size: 1,084 bytes (of a 30,720 byte maximum)
D:\downloads\electronics\microcontrollers\arduino\arduino-1.0.5\hardware/tools/avr/bin/avrdude -CD:\downloads\electronics\microcontrollers\arduino\arduino-1.0.5\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -carduino -P\\.\COM4 -b57600 -D -Uflash:w:C:\DOCUME~1\CRAZHH~1\LOCALS~1\Temp\build5719241868043018299.tmp\Blink.cpp.hex:i
avrdude: Version 5.11, compiled on Sep 2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean,
https://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "D:\downloads\electronics\microcontrollers\arduino\arduino-1.0.5\hardware/tools/avr/etc/avrdude.conf"
Using Port : \\.\COM4
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv:
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude done. Thank you.