This may be an obvious question but I just want to make sure - if I set a pin on my PIC18F2550 to be an input, does that pin automatically become a high impedance input? Ie. will I be able to connect the pin straight to the positive supply rail without fear of blowing the PIC?
This may be an obvious question but I just want to make sure - if I set a pin on my PIC18F2550 to be an input, does that pin automatically become a high impedance input? Ie. will I be able to connect the pin straight to the positive supply rail without fear of blowing the PIC?
hi Chris,
A PIC pin when set as an Input does have an high impedance, but do not connect any voltage greater than the +Vs supply the PIC's power rail, also no negative input voltage.
Do you have a specific question regarding a voltage you want to connect to the PIC.??
Thanks for the reply - no, I am only using 5V... I was just wondering whether I needed a "protecting" resistor to limit current to the PIC, but which obviously I dont need now since it's a high impedance input