ANSI Symbology for Proteus

[kiiimpo89]

Hello, i'm working on a scholar project, it's a transport band programmed with an ESP32 and I need to use ANSI or IEC symbols on my simulation, it's a very important thing because it's my electric diagramm, so I need to find an ANSI or IEC library.
If somebody knows an alternative or something I can do, please help me.

 

[ahsrabrifat]

KiCad has built-in support for IEC symbols.
Go to Preferences > Manage Symbol Libraries and make sure the libraries like Device, Relay, Switch, and Power are enabled.
Most components follow the IEC 60617 standard.

 

[eTech]

Hello, i'm working on a scholar project, it's a transport band programmed with an ESP32 and I need to use ANSI or IEC symbols on my simulation, it's a very important thing because it's my electric diagramm, so I need to find an ANSI or IEC library.
If somebody knows an alternative or something I can do, please help me.

I believe there is a setting to select the symbol set.
If not, it’s fairly easy to create your own custom symbols.

 

[fiziwell]

Can l use a single relay for this circuit

 

[Nigel Goodwin]

You could, and you should, it shows a single relay - a DPDT type.