Thanks for the help once again,
I have tried various resistors between base & ground of the transistors, also tried everything from 82nF to 10uF across pins 7 & 14, I have tried increasing C1 from 82nF to 50uF BP caps used & tried from 10uF to 470uF across the power supply rails.
I tried each thing seperately & then combined all together.
Dougy is the star grounding I have ok?
I have tried everything to get this to work but it still is no good, the only thing I haven't tried is a FBH
I even rebuilt the circuit onto another breadboard just incase their was a bad connection on the other board.
I have changed the 4013 & tried 3 of them all with the same results.
A very simple circuit can be very frustrating.
Is their something I can check on the Oscope to try to find out what is happening?
I need to get this working but am at a loss as to what the actual problem is besides my ignorance of course
Timescope
I just noticed your post & will have a look, thanks.
Cheers