Thanks MikeMi, the PI filter is filtering out the charging noises i think. I havn't tried it without though. I did try a store bought power port to USB adapter and the noise was tremendous, so a good friend told me to use the filter on the output and throw one on the input for good measure.
Wouldn't I just want to remove the entire reset circuit. The way I understand it, the circuit will reset when power is removed (I might be wrong). I didn't pay any attention to the rc circuit on the reset. I don't understand why it's there. Didn't add it to the drawing yet.
Voltage to the circuit will only be applied when my bike is off(through normally closed relay contacts). When It's running, my ignition will energize the relay and will remove voltage from the circuit.
The Ipod will only take 100-500mA, and from what I've read, it will regulate itself at 100-200mA.
I am going to put it all together inmy sim program. I'll post the drawing. I really appreciate all your help. I know just enough to be dangerous. Thankfully parts are cheap,,well, except for the Ipod.
Thanks, adown,
EDIT I dont have that timer in multisim. I could draw it, but I can't simulate it.