I have another question about using FETs in parallel, and a comparison, if you put sever diodes in parallel you still have a minimum voltage drop of around .7 for forward biasing, does the same apply to FETs or are they just resistive, For instance, it was noted that IRF4905 has an Rds-On is 0.02 ohms with -10v gate bias, so at 10 amps, Vds would be .2 volts. If 2 were in parallel, would the Vds on each be .1 volts as if it purely resistive. Just wondering and learning, and in a neat place like this, I hope I'm helping others learn.
Thanks
Kinarfi