Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

250-watt-grid-tie-inverter

Status
Not open for further replies.

xpaulxx

New Member
greetings to all staff

Hello, excuse my bad English, I'm Italian.
I saw that you are experienced with inverter gti. I have some gti (gp-350)
the controller is a ucc3806, I would change the maximum output power.
inverter 48v battery powered, has 250Watt output, I would bring its output to 200 watts so that less warm. you think you can do?
then with 5 gti can insert them one at a time 200 + 200 + 200 +200 +200 = 1000watt
thanks
Luca
 
I really would not worry about how warm it gets unless it was really poorly designed and runs untouchable hot but then there is no help for bad design either.

If you want to limit the peak power level all you need to do is limit the input power. The unit itself should take care of the rest.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top