1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

250-watt-grid-tie-inverter

Discussion in 'Renewable Energy' started by xpaulxx, May 3, 2012.

  1. xpaulxx

    xpaulxx New Member

    Joined:
    May 2, 2012
    Messages:
    1
    Likes:
    0
    greetings to all staff

    Hello, excuse my bad English, I'm Italian.
    I saw that you are experienced with inverter gti. I have some gti (gp-350)
    the controller is a ucc3806, I would change the maximum output power.
    inverter 48v battery powered, has 250Watt output, I would bring its output to 200 watts so that less warm. you think you can do?
    then with 5 gti can insert them one at a time 200 + 200 + 200 +200 +200 = 1000watt
    thanks
    Luca
     
  2. tcmtech

    tcmtech Well-Known Member Most Helpful Member

    Joined:
    Feb 22, 2009
    Messages:
    6,705
    Likes:
    432
    Location:
    Sawyer, North Dakota, USA
    I really would not worry about how warm it gets unless it was really poorly designed and runs untouchable hot but then there is no help for bad design either.

    If you want to limit the peak power level all you need to do is limit the input power. The unit itself should take care of the rest.
     

Share This Page