Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

12vDC(car socket) to 240vAC(40 VA only) inverter

Status
Not open for further replies.

555addict

New Member
i need some circuit diagrams to invert the 12v from my car socket to a 110/240vAC output.

very low power will do, only 30-40VA needed. i just need to charge my digicam batteries(AA/AAA) while on the run.

Battery charger specifications:
input: 100-240 V AC, 50/60 Hz, 16-21 VA



thanks in advance. :)
 
seeker said:
Hi 555addict,

Here are a couple: http://www.discovercircuits.com/C/co-dctoac.htm

It may be simpler and cheaper to find the output voltage of your charger and build a regulator circuit to run directly from the car's 12 volt system.

thanks for that, i'll have a look into that site.

some reasons for not using the output voltage:
1. output : 1.2 V, 1275mA !!!! this one is used to charge 2100mAh batteries.
2. it's got internal circuitry which controls the charging period, i do not want to bypass that. NiMH batteries are very costly.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top