Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

XICOR 9616 What do i read write it as in seeprog

Status
Not open for further replies.

muso58

New Member
Does anyone know what the XICOR 9616 8 legged eeprom shouls be read as .I read it as a 2408 on seeprog ,but dont want to write into it until i'm sure ,incase i damage the data .It is from a dashboard ,that i bought for my car after a fire & i need to correct the mileage .I have the dumps available 1 original & 1 with 1km more on the clock ,so you can see the difference .Any help with this would be appreciated
 
Re: XICOR 9616 What do i read write it as in seepr

muso58 said:
Does anyone know what the XICOR 9616 8 legged eeprom shouls be read as .I read it as a 2408 on seeprog ,but dont want to write into it until i'm sure ,incase i damage the data .It is from a dashboard ,that i bought for my car after a fire & i need to correct the mileage .I have the dumps available 1 original & 1 with 1km more on the clock ,so you can see the difference .Any help with this would be appreciated

Download the datasheet from Xicor, and compare it to the 2408, although if it's a similar sized I2C EEPROM, it's extremely likely to conform to the same standard.
 
re eeprom programming

Would it be possible for you to look at these dumps for me & re write them .I will be happy to pay you something for the time .If you have pay pal i could pay you instantly ,say £30 pounds .
Regards Steve Elliott
 
re xicor eeprom

I found this info using some other numbers on the chip -
Part Number 4652005
Desc DIP-8
Brand XICOR

Can anyone tell me what i should read/write it as on see prog
 
Re: re eeprom programming

muso58 said:
Would it be possible for you to look at these dumps for me & re write them .I will be happy to pay you something for the time .If you have pay pal i could pay you instantly ,say £30 pounds .
Regards Steve Elliott

What's to look at?, I thought you just wanted to copy one to the other?, for that matter why not just change the chips over?.

If you're wanting to alter the milage, for which there's no legal reason to want to do!, the data is sure to be encrypted!.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top