Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Using a wireless tech to send sensor readings to a pda

Status
Not open for further replies.

Ali1972

New Member
Hi

I'm trying to build a stand alone unit that will read three flow sensors on an agricultural sprayer, using something like the sensor in the following link;

**broken link removed**

and also read an On/Off switch. Sending the data back to a pda. Pda (HP 214) has bluetooth, wireless network and mini-usb ( am not sure wether the usb has a limited connectivity). Bluetooth would be my preferance. Distance isnt a problem as the two will be no more than 6 ft apart.

Can write some software in VB to run on the PDA to hopefully read the data and GPS speed figure, to give a Live application rate.

Really needs to run on the tractors 12v power supply.

Have some basic knowledge of electronics, but seem to be in well over my head at the moment.:confused: Any ideas would be extremely helpful.

Thanx
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top