Karaethon
New Member
Hello All, Im trying to builda Time Delay Control for my computers Fan(s). My Computer doesnt get shut down often, but when it does the case temperature has spiked to as high as 60 degree C ( i usualy use F, but my case temp monitor is in C and I cant figure out how to change it) This is definitely NOT a good thing, So I decided to build a circut that will keep the fans spinning for a specific time after system shutdown (unless internal temp is still over a set limit). Now I'm a programmer, my electronics knowledge is a bit rudimentry, so I have no clue what I need to do this. Can anyone help me design this?
Oh, and one more thing, a few requirements.
#1 I dont want this taking up a USB port so I want it to plug into the USB pins on the motherboardand Have pins on it that allow me to plug the USB cable that would plug into the mother board into it.
#2 It must be able to monitor temp in the case, and make decisions based on the current temp
#3 I have to be able to set the Keep-Alive time from software.
#4 it needs to be able to monitor and alter fan speeds.
Oh, and one more thing, a few requirements.
#1 I dont want this taking up a USB port so I want it to plug into the USB pins on the motherboardand Have pins on it that allow me to plug the USB cable that would plug into the mother board into it.
#2 It must be able to monitor temp in the case, and make decisions based on the current temp
#3 I have to be able to set the Keep-Alive time from software.
#4 it needs to be able to monitor and alter fan speeds.