Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

USB not recognized for pic18F14K50

Status
Not open for further replies.

AAnkur

New Member
Hello
I am trying to make USB connection to PIC18f14k50.
Following are connections :-

Pin 1 (Vdd)------>5V
Pin 2 & 3 -------->External crystal oscillator (20MHz)
Pin 4 (MCLR)------------->Pulled high with 10K
Pin 20 -------------------->GND
Pin 17---------------------> capacitor (0.1UF)

First I try to upload the bootloader through MPLAB IDE through pickit3.
After downloading the bootloader, I connect the USB to pic18f14K50.
Doing this, my windows 10 gives a message "USB not recognized"

Any help in this regard is appreciable.

Thanks
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top