un peux d'aide

[ayne2351986]

svp qui peux m'aider de traduire ce programme de langage assembleurs vers langage MIKRO C


; -------------------------------------------
; RECEIVE CHARACTER FROM RS232 AND STORE IN W
; -------------------------------------------
; This routine does not return until a character is received.
;
receive btfss PIR1,RCIF ; (5) check for received data
goto receive

movf RCREG,W ; save received data in W
return


; -------------------------------------------------------------
; SEND CHARACTER IN W VIA RS232 AND WAIT UNTIL FINISHED SENDING
; -------------------------------------------------------------
;
send movwf TXREG ; send data in W

TransWt bsf STATUS,RP0 ; RAM PAGE 1
WtHere btfss TXSTA,TRMT ; (1) transmission is complete if hi
goto WtHere

bcf STATUS,RP0 ; RAM PAGE 0
return

merci d'avance

 

[atferrari]

Je ne sais pas s'il va vous être outil ou non, mais essaisez ici:

**broken link removed**