Speakerguy
Active Member
I'm building an all N-channel H-bridge. I figure I should strap some diodes around the FET's so the body diodes don't blow, yes?.
I have 1N4002, 1N4148, and 1N5819.
Should I use the Schottky's because they kick in faster and at a lower voltage or will either of the others be fine?
I have 1N4002, 1N4148, and 1N5819.
Should I use the Schottky's because they kick in faster and at a lower voltage or will either of the others be fine?
Last edited: