muralibhat
New Member
Hi I need a 16F877A digital clock circuit with DS1307 and 2*16 LCD display with source code Kindly Help
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Would you like fries with that?Hi I need a 16F877A digital clock circuit with DS1307 and 2*16 LCD display with source code
You should try it then. That is where the learning will take place. What language are you using?it is simple to shift to LCD
muralibhat said:Thank You The project you have suggested is good but it uses the LED not LCD any way it is simple to shift to LCD
Do you have decoupling capacitors(100nF, marked 104) between the power pin, and ground, for each of your chips?starts only if I touch anu pins of any IC or positive terminal or ground
i.e.DS1307 starts only if I touch anu pins of any IC or positive terminal or ground.
Please note that the initial power-on state of all registers is not defined. Therefore, it is important to
enable the oscillator (CH bit = 0) during initial configuration.