Tried to get help on another forum but "Automotive modifications" was a no no? even thou i'm technically not modifying a car when i'm building the car from scratch
Basically a Noob here, but have a basic understanding and just need help on how to implement a secondary delay on a delayed off circuit.
I wanted to try and build the Circuit on Bowdens Website but the boss wanted something more prebuilt so we ended up with a CanaKit UK197. But the problem i found is the quick off then back on that it does as you ground the trigger during the delay (Resetting of the timer). So i like to fix this issue so it doesn't do that. And i was thinking of implementing the circuit on Bowden's site on the output side before it goes to the transistor.
I truly hope this makes sense to people
**broken link removed**
Q1 = 2N4123
C6 = 100uF
R5 = 1000 ohms? (Brown, black, red, gold Stripes)
Relay = 200 ohms? (PN :HJR-3FF-S-Z by Tianbo)
This circuit is going to be used the run a secondary electric water pump in a car that's a rear engine from Radiator setup that's only needed mostly at idle. Just didn't want to have the water pump turning off and on in traffic like situations so wanted a delay of like 20-30 seconds before the pump shuts off and is reset when the car came back to idle.
Thank you
Basically a Noob here, but have a basic understanding and just need help on how to implement a secondary delay on a delayed off circuit.
I wanted to try and build the Circuit on Bowdens Website but the boss wanted something more prebuilt so we ended up with a CanaKit UK197. But the problem i found is the quick off then back on that it does as you ground the trigger during the delay (Resetting of the timer). So i like to fix this issue so it doesn't do that. And i was thinking of implementing the circuit on Bowden's site on the output side before it goes to the transistor.
I truly hope this makes sense to people
**broken link removed**
Q1 = 2N4123
C6 = 100uF
R5 = 1000 ohms? (Brown, black, red, gold Stripes)
Relay = 200 ohms? (PN :HJR-3FF-S-Z by Tianbo)
This circuit is going to be used the run a secondary electric water pump in a car that's a rear engine from Radiator setup that's only needed mostly at idle. Just didn't want to have the water pump turning off and on in traffic like situations so wanted a delay of like 20-30 seconds before the pump shuts off and is reset when the car came back to idle.
Thank you