My RC Car (Homemade tank) 56k'ers beware

[bryan1]

Eh Pike,
Just a thought for your tank mate, to improve the grip a heap better replace the chain with a toothed belt say off a car engine. It's easy to cut and join by splicing and contact cement seems to hold up pretty well. After looking at the tank I'm inspired enough to make 1 for me and my son. I do have a 7 channel R/C controller off an R/c plane so hopefully I won't have alot of trouble interfacing it. Then once I learn pic's a bit more replace the R/C controller and make it automonous.

Cheers Bryan

 

[Nigel Goodwin]

I do have a 7 channel R/C controller off an R/c plane so hopefully

Unless the laws are different in Australia?, it's an offence to use an airplane R/C for a model other than an aircraft - for very good sensible reasons!.

 

[pike]

So Pike, where did you get all this metal for the frames and everything? It sure beats wood and plastic.

local scrap yard has the right stuff when you come at the right time and at dirt cheap prices. I got 7.5 kgs of aluminium for $13 US (15lbs) but you have to come at the right time or they'll send it off to a great big smelter.

i was considering a composite rubber/steel bolts tread system but i ran out of time and just took the easy way out with press fit cogs, and bikes chains. I'll draw a diagram soon so you know what i mean.

 

[tom_10_tom]

nice tank pike,
i am trying to make one for myself
would you tell me where to fing a good design for the tank body model ?

 

[blueroomelectronics]

Pike hasn't been here in years. The posts are from 2005