Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

How to trigger my DS1054Z with a DG1022Z sweep?

Status
Not open for further replies.

Holes Flow

New Member
Experts,

Objective/Goal:
I have these 2 critters, and I want to use the scope as a poor-man's SA for just audio (up to 20kHz).

Desired:
I will set up a sine sweep on the DG, and feed it to the DS. But I want the scope to trigger on the start (lowest freq) of the sweep each time. This way, I can set the scope width to the same time period as the sweep.

Project:
Passive/Active Bandpass filters for audio spectrum (not for crossovers, but for pre-filtering of band to be subsequently analyzed.

Thank you for any experience/insight!

P.S. I've tried in-scope FFT, and the output isn't useful for this project.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top