jakeselectronics
Member
Ok so for the first config setting (Configuration Setting Command)
433 band
60kHz deviation
dont worry about CLK out and the internal capacitor setting.
the only other thing is the modulation polarity (ms)
so with the 60kHz deviation at 434Mhz
a 1 will be represented by 434.06MHz
and a 0 will be represented by 433.94
IF the ms bit is set to 1
and vice versa if set to 0?
Does it not matter as long as the receiver is the same?
So this is what I have for the first config register:
**broken link removed**
Any issues? or am i understanding everything so far?
433 band
60kHz deviation
dont worry about CLK out and the internal capacitor setting.
the only other thing is the modulation polarity (ms)
so with the 60kHz deviation at 434Mhz
a 1 will be represented by 434.06MHz
and a 0 will be represented by 433.94
IF the ms bit is set to 1
and vice versa if set to 0?
Does it not matter as long as the receiver is the same?
So this is what I have for the first config register:
**broken link removed**
Any issues? or am i understanding everything so far?
Last edited: