samson.bunty1986
New Member
Kindly assist me, can i change that inductors which am using?? If i change,which inductor have to use ?? My output load specification is 24V,3A. Input is between 20-30V.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Need to change with 4uH inductor??? Can you tell me how you calculated to use 4uH?? which formula you used to calculate inductor value???
Then start a thread about your 15kw request and not jump in the middle of this topic.hi everyone, please i need a circuit diagram for a 15KW 3-phase DC-AC inverter
I used R5 exact 0.01Ohm , 1W resistor.
I checked with resistive load. Two resistors 22 Ohm 10W and 5W in series. It is taking 270 - 300mA. That time my output getting drop to 13-14V. If i connect bulb it is dropping to 8V. The mosfet is getting too hot once i keep load. C3 & C4 are alluminium capacitors.