Oznog
Active Member
Got my PICC code for the 1-wire interface on my DS18S20 digital temp sensor to work with my PICC C-code!
Boy interrupts totally screw up the protocol. I had so much trouble I had to flat out disable interrupts during the critical low periods. I also should have noticed the flowchart showing you must do a ROM command (SkipRom works) between Init and Convert command.
Just wanted to share the accomplishment...
Boy interrupts totally screw up the protocol. I had so much trouble I had to flat out disable interrupts during the critical low periods. I also should have noticed the flowchart showing you must do a ROM command (SkipRom works) between Init and Convert command.
Just wanted to share the accomplishment...