1. Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
    Dismiss Notice

Attiny2313 dc ventilator control

Discussion in 'AVR' started by opamp, Dec 20, 2014.

  1. opamp

    opamp New Member

    Joined:
    Dec 19, 2014
    Messages:
    4
    Likes:
    0
    Hello!
    Can i use Attiny2313 to control multiple dc ventilators? i want to sent input signal from potentiometer that has input of 5V. microcontoller uses that signal and than send different output signals to ventilators motors generated in combination with input signal and software combination. Ventilators motors are simple dc motors which speed depend of voltage value from 0v to 5v.
    Could i have 2 or more input signals to attiny2313 and do they could be analog voltage?
    Does attiny2313 output voltage is pwm or analog voltage?
    I have chosen attiny2313 because i have programmator for it,he is cheap and i can find him in my shop.
     
  2. alec_t

    alec_t Well-Known Member Most Helpful Member

    Joined:
    Jul 10, 2011
    Messages:
    9,257
    Likes:
    1,218
    Location:
    Cardiff, Wales
    The datasheet will tell you.
     

Share This Page