Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And what? And is there any documentation ready?Id suggest searching on sensor-less bldc controllers, there are quite a few appnotes on that topic. Also there will be a few desings you can look at and see how they are done.
Thank you, I've seen it all. But I thought I would find a ready drive circuit.https://bit.ly/1oQ4ZgX Why don´t you check yourself? I can see at least five pdfs that show how its done.
This is very useful. How to read these files? I could only read *.Pdf , *.Png.You can download this **broken link removed** and there is ngbldc somewhere inside, its using some atmega and the code should be there too, so you should not have too much trouble adapting it to your needs.
I poorly explained. In the archive many files with different extensions.you dont know how to open a zip? download 7zip or something.
In ngos-0.68\sources\ngblc-4mini\ you have three directories with three different controller firmwares for the atmegas, apparently written in assembler. Use any IDE you like, but the atmel studio 6 should work ok. Or just read the readme files.
In ngos-0.68\doc\hw-ngblc-4mini-r2\ you have pdfs with the schmatic and the board layout.
Thank you very much for wanting to help.Third question makes no sense whatsoever.
Thanks, but this microprocessor ATmega8535 - is in Arduino?This may be of some help
https://hackaday.com/2014/10/08/brushless-motor-controller-shield-for-arduino/
What is different about these programs ngos-0.68\sources\ngblc-4mini\ ?
My motor with the photoelectric sensor feedback for 720 pulses per rotation. Can I use it instead of the Hall sensors?
Do the circuit on the ATmega8535 with Hall sensors?