I have a request to build an a/d converter for a guitar that would change the frequency of the incoming signal by a set amount. I was thinking that a microcontroller might be able to handle this but wanted to get some input.
Here is an example of what he needs:
Guitar pickup to a/d converter -> divide the sampled frequency by 2 and output as a digital signal or back through a d/a converter. The sample rate needs to be as high as possible.
Any thoughts?
Here is an example of what he needs:
Guitar pickup to a/d converter -> divide the sampled frequency by 2 and output as a digital signal or back through a d/a converter. The sample rate needs to be as high as possible.
Any thoughts?