Hello, I bought a 12v 6A car charger a while back, from new, an its stopped charging. I does turn on, power LED comes on and so does the charge indicator LED too. but it dont charge my batteries. it did before so im stumped why not this time. the standing voltage on the batter will go no higher. I have done a Bulb test across the terminals and it dont come on - the charger fuse is fine. the terminals dont spark. i have took apart the charger - everything appears fine, i used a multimeter to check the current flow. it appears ok? i am learning about the inner component as i go but it does confuse me some times. the charger has a built in over charge protector.
#Summry - the charger turns on - detects the battery - but will not put power into it.
Any ideas?
IT HAS BEEN FIXED - The problem was the big white 5w resistor. so if you have a similar problem then its an area you will want to check. an its a simple part to replace =D
#Summry - the charger turns on - detects the battery - but will not put power into it.
Any ideas?
IT HAS BEEN FIXED - The problem was the big white 5w resistor. so if you have a similar problem then its an area you will want to check. an its a simple part to replace =D
Attachments
Last edited: