Thought this is worth sharing.
I have six open tickets with respect to the new board. With two more to add.
00309614 CNANO Curiosity NANO USB - 16f18446 Board driver installation failures on Win7, Win8.x and Win10 - various errors.
I have posted a patch kit to resolve the missing drivers.
00310392 CNANO Curiosity NANO USB - 16f18446 - Config - the unpublished configuration.
Work in progress with Microchip Product Development.
00310394 CNANO Curiosity NANO USB - 16f18446 - Initial Firmware - the initial firmware, a bootloader and why do you need to power cycle the board so often...
Work in progress with Microchip Product Development but there is no bootloader and they dont yet have the power cycle issue sorted.
00310395 CNANO Curiosity NANO USB - 16f18446 - Documentation - the incorrect URL access from the Virtual Drive.
Microchip will revise the referred web page... but, they need help to identify all the documentation needed. Work in progress with Microchip Product Development.
00310396 CNANO Curiosity NANO USB - 16f18446 - Documentation - debuggers, virtual comm port error and lots more of documentation misisng.
Work in progress with Microchip Product Development.
00310397 CNANO Curiosity NANO USB - 16f18446 - Firmware ERROR!!!! - corruption of firmware when transferring via the USB/CDC.
Work in progress with Microchip Product Development.
To be added - Linux unable to boot with board attached.
To be added - Linux serial device. Under Linux, the /dev/ttyACM0 error.
On Twitter I have called this XpressFrankenBoard.
It is a mix of both Microchip and ATMEL.
The tickets and the resolutions will be posted here;
https://sourceforge.net/p/gcbasic/discussion/demonstrationcode/thread/97d1ec43/?limit=250#7f5f I wont have time to post everywhere.
I am creating a webpage this weekend with all my communications with Microchip, and, I will post to
https://sourceforge.net/p/gcbasic/discussion/demonstrationcode/thread/97d1ec43/?limit=250#7f5f the results of my next meeting with Product Development to resolve the issues.
I have posted lots of demos for the board, see GitHub at **broken link removed** I have also posted a lot of documentation and the driver pack.
I will post again once I get the webpage written - enjoy XpressFrankenBoard