Would this class2 transformer work in place of this

[Dougcrf]

would a 3.0VDC 1.0A work in place of a 3.0VDC 1.6A as a charger, it is being used for a hair cliper.

Thanks, Doug

 

[microtexan]

transformer

Assuming you'll be using the rest of the original charging circuit, all should be fine.

 

[gerty]

Make sure the polarity (+ -) of the connector is the same.

 

[ecerfoglio]

would a 3.0VDC 1.0A work in place of a 3.0VDC 1.6A as a charger, it is being used for a hair cliper.

Thanks, Doug

Your old supply is rated at 1.6 A, and your new transformer is rated at 1.0 A.

It may work if your hair cliper uses 1.0 A or less, but if you can you should get another one with a rating of 1.6 A or more